Filter results

Category

Media

Creators

Subject period

Places

Events

Associated person/organisation

Materials

Themes

Keywords

• Study for 'Burners' - Burner Using Oxy-acetylene Torch

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: squared sketch of a man facing away from the artist, wearing goggles and using an oxy-acetylene torch. Small study of hand lower right.

• Study for 'Riveters' (LD1375)

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: a figure wearing goggles crouches down over a sheet of metal holding a rivet gun.

• Studies for 'Welders' (LD925 AND LD926)

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: squared up drawing of two figures welding

• Shipbuilding on the Clyde: Riveters

  (art) Made by: Spencer, Stanley (Sir) (RA) 1941

  image: From left to right; two men apply anti-corrosion paint to two completed crow's nests and a gang of six men fit temporary bolts to the steel masts and line up the rivet holes while the 'heater boy' above them prepares a brazier and collects a rivet...

• Study for 'Shipbuilding on the Clyde' - Miss Kathie Chalmers on Fabricated Stern

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: a sketch of Kathie Chalmers, a female worker dressed in dungarees and standing braced on her right leg, the left foot resting up on a ledge in front of her. She holds a welding mask in front of her face with her right hand, and an arc welder in...

• Study for 'Shipbuilding on the Clyde' - Composition for 'Caulkers'

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: a squared-up sketch of a gang of shipwrights at work on deck using special caulking hammers (a hammer with a long, narrow head) and an iron chisel to seal the joints between the wooden decking using oakum (hemp rope soaked in oil) which was forced...

• Study for 'Shipbuilding on the Clyde' - Plumber Carrying a Pipe

  (art) Made by: Spencer, Stanley (Sir) (RA) 1945

  image: a full length study of a plumber in a flat cap carrying a bent section of pipe on his shoulders. The bent section curls around the front of his chest, and he steadies it with both hands.

• Study for 'Shipbuilding on the Clyde' - Head of a Riveter

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image recto: three-quarter profile of the head of a man in a flat cap, looking to his right. To the right of the main portrait is another profile of the same man, squared-up. Above the portraits is a sketch of a man working a plating machine. image verso...

• Study for 'Shipbuilding on the Clyde' - Pulling an Angle-iron from a Furnace. Provisional study for 'Furnaces'

  (art) Made by: Spencer, Stanley (Sir) (RA) 1940-05-01

  image recto: squared studies, similar to IWM ART LD 6008 120, showing men pulling a hot angle-iron from a furnace, braced against each other in the effort to pull the heavy weight. A central incomplete study shows three men working on the iron 'dogs'...

• Study for 'Shipbuilding on the Clyde' - Two Men Pulling a Frame from a Furnace

  (art) Made by: Spencer, Stanley (Sir) (RA)

  image: a squared sketch showing two men pulling an unseen angle-iron from a furnace with great force, standing close together, their free arms locked together and braced. Another figure upper left pulls at the same angle-iron, his head turned to the...